Steps required when first time launched

Please note: Admin privileges are required to perform installation

1. Install CC Capture (the most recent version that supports Spectro 1 Bridge). During the installation install additional software dedicated to Spectro 1 Bridge.
2. Connect Bridge to your computer
3. Wake up your instrument (has to be charged)
4. Launch CC Capture and select Spectro 1
5. Insert USB Stick with Bridge License key into the USB port. A copy of the license file will be stored on your computer for future use.

USB Stick with a license key will be stored in a local folder on your computer- next time you don't need to use a USB stick

Be sure that your instrument is charged before connection. Fully charged make it possible to take up to 300 measurements

You may also operate it with the power cable connected (especially for ICC profile creation purposes)