With some limitations coming from Instruments ChromaChecker makes it possible to create ISO 3664 Audits. 

The fastest way is to define new Lighting in Lighting Inspector 

Add a new light source

At this stage it is important to specify ISO conditions:

P1 - Critical Comparison Prints (2000lx) typical for press consoles or QC Stations

P2 - Practical appraisal of prints (500 lx) Lightboots especially as a component of the Softproofing Station

In short, Audit is a Lighting Evaluation repeated 9 times to check if specific requirements are met ISO requirements in nine locations on the table. 

The fastest way is to connect Myiro-1 or i1 Pro to CC Capture and take measurements - the whole process takes a couple of minutes. Before you made a series of 9 measurements check in the center of the area if it passes - do a single measurement.

In this example, we have a Hi-Quality LED spectrally calibrated lamp - with no problem it passes!

ChromaChecker can offer fully calibrated LED-based lamps for any size. 

In next step select Audit Template

And continue moving the instrument to the location shown on the diagram:

Finally, the simple audit report is displayed when 8 measurements are compared to the center one.

Expert View

Expert when logged into the website interface can see all details and timelines.

List view:

Audit Summary:

Single Measurements Details

and more...